Ronseal One Coat Damp Seal White 250ml
Description
BEFORE YOU START
Make sure the cause of damp has been fixed. Open your doors and windows for ventilation and put down dustsheets to protect anything you don't want to get paint on.
Preparation: Remove any wallpaper with a scraper and sand off any loose or flaking paint. Make sure the area you are painting is clean, if you've got mould, get rid of it with our 3-in-1 Mould Killer.
You can paint onto damp surfaces, just make sure they're not dripping wet.
USING YOUR DAMP SEAL
Give the paint a really good stir, then use a roller or brush to put it on. If you're covering a small damp patch, make sure you are painting at least 30cm around the area.
It'll be touch dry in 2 hours. After 4 hours it'll be ready to paint or wallpaper over. If the area is prone to mould, you can paint over it with our 6 Year Anti-Mould Paint.
Usage Areas: All indoor walls and ceilings
Compatibility: Bare or previously painted walls and ceilings
Clean Up: Clean all brushes or rollers in warm, soapy water
Coverage: 5m² per litre
This Ronseal One Coat Damp Seal comes in the following:
Colour: White
Size: 250ml
Specifications
Catalog Page Number
965
Application
Paint
Brand
Ronseal
Categories
Decorating & Painting
Category
Sealer Paint & Stain Blocks
Colour
White
Form
Damp Seal
Manufacturer
Sherwin-Williams
Size
250ml
Type
Sealer Paint & Stain Blocks
selection not available, try a different combination
selection not available, try a different combination
Compare