ForgeFix Pronged T Nuts ZP M8 Bag 10
Description
APPLICATION:
Used widely in the soft furnishing trades where strong timber connection is required. Also extensively used in Playground and Climbing Wall manufacturing.
GUIDE:
Use 6mm bolt with M6 and 8mm bolt with M8 T-Nuts. When installing the T-Nut tap home and the sharp fins pierce the substrate and fix the T-Nut firmly in place avoiding any rotation when tightening. The T-nuts can be used with many bolting products.
A T-nut, (also known as a Blind nut) is a type of nut used to fasten a wood, particle or composite materials work piece, leaving a flush surface. It has a long, thin body and a flange at one end, resembling a T in profile. The flanges of T-Nuts often have hooks or serrations on the prongs that sink into a wooden work piece, providing better retention.
Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.
These T Nuts have the following specification:
Finish: Zinc Plated
Size: M8
Pack: Bag of 10
Specifications
Catalog Page Number
770
Brand
ForgeFix
Categories
Nuts, Bolts & Screws
Category
Pronged Nuts
Country of Origin
Taiwan
Finish
M8
Manufacturer
ForgeFix
Pack Qty.
Bag 10
Size
Zinc Plated
Type
Pronged Nuts
selection not available, try a different combination
selection not available, try a different combination
Compare